3′ x 6′ Kundel ShoreLite Lite Aluminum Trench Box

The Kundel ShoreLite Lite 3′ x 6′ aluminum trench box is a lightweight, modular protective system designed for localized utility excavations, service work, spot repairs, and other jobs where a smaller shield can be positioned more easily than a conventional steel trench box.

This configuration uses 3-foot-high, 6-foot-long aluminum panels with a 2.5-inch profile. The assembled box weighs approximately 455 lbs, making it easier to transport, assemble, and handle than many larger trench-protection systems.

Kundel’s ShoreLite Lite system features a pin-less modular design intended to simplify assembly and disassembly. Individual components can be assembled by a two-person crew in suitable conditions, while the balanced four-point rotating rigging system helps with lifting and placement using properly rated equipment.

The 3′ x 6′ box has an 840 PSF panel capacity, 18 inches of pipe clearance, and manufacturer-listed depth ratings of 33 feet in Type A soil, 18 feet in Type B soil, and 14 feet in Type C soil. All ratings and configurations must be verified using the applicable Kundel tabulated data.

Key Benefits & Crew Efficiency

• Lightweight Aluminum Construction: At approximately 455 lbs, this box is easier to transport and assemble than many traditional steel trench shields.
• Designed for Localized Work: The 6-foot panel length is well suited to spot repairs, service connections, utility exposure, and other short-duration excavations.
• Pin-Less Assembly: Kundel’s pin-less connection design reduces the number of loose assembly pins and simplifies system setup and disassembly.
• Modular Panel System: ShoreLite Lite panels and compatible accessories can be combined into different system heights and configurations as permitted by the manufacturer.
• Two-Person Component Assembly: The lightweight modular components are designed so a two-person crew can assemble the system without relying on a large excavator for every assembly step.
• Balanced Lifting System: Four-point rotating rigging helps keep the assembled shield balanced during lifting and placement with properly rated equipment.
• Easy Transportation and Storage: The individual aluminum components require less storage space and may be transported with smaller vehicles than many conventional trench boxes, subject to vehicle capacity and securement requirements.
• 840 PSF Panel Capacity: Provides manufacturer-rated panel strength for compatible utility and excavation applications.
• 18-Inch Pipe Clearance: Provides space beneath the spreader area for compatible pipe, conduit, service connections, and utility components.

Product Specifications

Pricing & Logistics

Price: $5,735

Contact Iron Lot to confirm current pricing, availability, included components, compatible spreader widths, optional accessories, and shipping costs.

Attachments and Accessories

Optional attachments, connectors, leg kits, additional panels, and other system components may be sold separately.

Confirm the exact contents of the quoted configuration before ordering. The required components depend on the desired inside width, system height, number of sides, excavation dimensions, and intended shielding or shoring application.

Freight and Delivery Coordination

The approximately 455-pound assembled weight makes the ShoreLite Lite 3′ x 6′ easier to transport than many conventional trench shields. However, transportation and unloading must still account for the complete shipment, including panels, spreaders, legs, connectors, rigging, and accessories.

We can coordinate delivery to your contractor yard, municipal facility, equipment location, or jobsite.

Target Applications

The ShoreLite Lite 3′ x 6′ is primarily suited to localized excavations where a 3-foot panel height and 6-foot working length are appropriate for the planned work.

Typical applications may include:

• Water-service repairs
• Gas-service connections
• Electrical and telecommunications work
• Utility tie-ins and service taps
• Curb-stop and valve access
• Localized utility exposure
• Short pipe and conduit repairs
• Spot repairs in streets or easements
• Maintenance work in restricted-access areas
• Shallow bore or receiving-pit applications where the dimensions are suitable

The shorter panel length can make this box easier to position around existing utilities, pavement, traffic-control restrictions, landscaping, and other jobsite obstacles.

Suitability depends on the excavation dimensions and the size and location of the pipe, conduit, fitting, valve, utility component, or structure being installed or repaired. Customers should verify that the 18-inch pipe clearance and selected inside width provide sufficient room for the planned work.

Modular ShoreLite Lite System

ShoreLite Lite is a single-profile modular aluminum system. Standard configurations are available in multiple panel heights and lengths, and compatible components may be combined to create taller or multi-sided systems.

Depending on the application and applicable tabulated data, the system may be configured with:

• Two-sided shielding
• Three-sided protection
• Four-sided protection
• Stacked panels
• Compatible leg kits
• Corner connectors
• Multiple spreader widths

The 3-foot-high panel may be used as a standalone configuration or as part of a taller compatible ShoreLite Lite assembly. Any stacked or multi-sided configuration must be assembled using the required Kundel components and evaluated under the applicable manufacturer’s tabulated data.

Critical Selection & Safety Factors

Is the ShoreLite Lite 3×6 Right for Your Excavation?

The exterior height and length of a trench box do not by themselves determine whether it is appropriate for a job.

Selection should consider:

• Excavation depth and width
• Soil classification
• Surcharge loads
• Nearby traffic and equipment
• Groundwater conditions
• Pipe or utility-component dimensions
• Required working clearance
• Selected spreader width
• Access and egress
• Lifting and placement equipment
• Whether the system will be used for shielding, shoring, or another manufacturer-approved configuration

The 3-foot shield height does not mean the box is limited to a 3-foot-deep excavation. Likewise, the listed soil depth ratings do not mean the box can automatically be used at those depths in every excavation.

The Competent Person must evaluate the actual excavation and verify that the complete protective system is appropriate for the soil, depth, surcharge loads, system configuration, and jobsite conditions.

Depth Ratings & Tabulated Data

The manufacturer-listed maximum soil depth ratings are:

• Type A soil: 33 feet
• Type B soil: 18 feet
• Type C soil: 14 feet

These ratings must be interpreted through the applicable Kundel tabulated data. Ratings may depend on the selected spreader width, panel arrangement, system height, shielding or shoring configuration, and other limitations.

Excavations exceeding 20 feet in depth generally require protective systems designed or approved under the applicable engineering requirements. Do not rely on a product-page depth rating as a substitute for the manufacturer’s tabulated data or a project-specific engineered design.

The Competent Person must classify the soil, inspect the excavation, evaluate changing conditions, and confirm that the system is installed and used correctly.

Assembly, Lifting & Handling

Kundel describes ShoreLite Lite as a lightweight system that can be assembled by two people. This refers to the modular components and assembly process and should not be interpreted as permission to manually lift or move the complete assembled box without evaluating its weight and the planned handling method.

The box should be lifted, lowered, repositioned, and removed using the manufacturer-approved rigging points and equipment with sufficient rated capacity.

Before each use, inspect:

• Aluminum panels
• Spreaders
• Legs and connectors
• Rigging points
• Welds and structural components
• Locking and connection areas
• Damaged, bent, cracked, or excessively worn parts

Remove damaged components from service until they have been evaluated according to the manufacturer’s requirements.

Why Choose the Kundel ShoreLite Lite 3′ x 6′?

The ShoreLite Lite 3′ x 6′ combines a short working length with lightweight aluminum construction and a modular, pin-less assembly system. It is a practical option for contractors who frequently perform localized utility repairs and need a trench-protection system that can be transported, stored, and assembled without the logistical demands of a large steel trench box.

Its modular design also allows contractors to expand their ShoreLite Lite equipment inventory with compatible panels, legs, connectors, and accessories for other excavation configurations.

Final selection must be based on the actual excavation, intended application, component dimensions, manufacturer’s tabulated data, and the requirements established by the project’s Competent Person.

Request Pricing and Availability

Iron Lot supplies trench boxes and trench safety equipment to contractors throughout the United States.

Contact us for:

• Current product availability
• Spreader selection and pricing
• Multiple-unit quotations
• Freight quote and delivery coordination
• Alternative aluminum trench box options
• Steel versus aluminum trench box comparisons
• Equipment financing information

This Product Ships from Ohio

Payment Options:

We accept company check, wire transfer, ACH, and credit card payments. We also offer financing through Ascentium Capital.

Financing: Ascentium Capital offers fast and flexible financing. With their quick and convenient way to purchase equipment, working with Ascentium Capital helps you acquire the funds you need for your equipment purchase. With financing and leasing of up to $2,000,000, Ascentium Capital works with you to make the application process simple and at no obligation.

To learn more about Ascentium Capital and how it can assist you, click image below:

Call Iron Lot at 336-516-8011 or request a quote online for current pricing, availability, and freight information.

Not sure which trench box is right for your project? Compare additional trench boxes for sale, including steel, aluminum, and manhole box options.