10′ x 18′ ESC ASF4 Steel-Framed Aluminum Trench Box

$26,535.00

The ESC ASF4 10′ x 18′ steel-framed aluminum trench box features a 507 PSF panel capacity, 7,320-lb weight, 60″ pipe clearance, and 16′4″ length between spreaders. Maximum depth ratings are 16 ft (B-45), 13 ft (C-60), and 11 ft (C-80). Includes four 36″ spreaders, with other spreader sizes available.

Description

10′ x 18′ ESC ASF4 Steel-Framed Aluminum Trench Box

The ESC ASF4 10′ x 18′ steel-framed aluminum trench box combines a steel frame with aluminum panels to provide a trench shield for utility, construction, and excavation work. Its 10-foot shield height and 18-foot length provide an extended protected working area for underground utility and infrastructure projects where this shield configuration is appropriate.

The ASF4 10×18 has a 507 PSF panel capacity and weighs approximately 7,320 lbs. It provides 60 inches of pipe clearance and 196 inches (16′4″) of length between the spreaders.

Manufacturer data provides maximum depth ratings of 16 feet in B-45 soil, 13 feet in C-60 soil, and 11 feet in C-80 soil, subject to the manufacturer’s current tabulated data, proper shield configuration, and evaluation by the project’s competent person.

Key Features

  • 10′ shield height
  • 18′ shield length
  • Steel-framed aluminum construction
  • 507 PSF panel capacity
  • 7,320 lb approximate weight
  • 60″ pipe clearance
  • 16′4″ length between spreaders
  • Extended working length for underground utility and infrastructure construction

Specifications

Manufacturer ESC
Product Line ASF4 Aluminum Steel Framed Shield
Shield Height 10 ft (120 in)
Shield Length 18 ft (216 in)
Weight 7,320 lbs
Panel Capacity 507 PSF
Pipe Clearance 60 in
Length Between Spreaders 196 in (16′4″)
Construction Steel and Aluminum

Maximum Depth Ratings

Soil Classification Maximum Depth Rating
B-45 16 ft
C-60 13 ft
C-80 11 ft

10′ x 18′ ESC ASF4 Price and Spreader Configuration

The 10′ x 18′ ESC ASF4 Steel-Framed Aluminum Trench Box is priced at $26,535 and comes standard with four 36″ spreaders. This configuration provides a complete trench shield setup ready for assembly and use.

Other spreader sizes are available to accommodate different trench widths and jobsite requirements. Contact Iron Lot for available spreader options, pricing, and assistance selecting the appropriate configuration for your excavation.

Applications

The 10′ x 18′ ASF4 provides substantial shield height and an extended working length for underground utility and infrastructure excavations. Potential applications include:

  • Water and sewer utility construction
  • Underground pipe installation
  • Pipe repair and replacement
  • Utility main installation and rehabilitation
  • Utility tie-ins and service connections
  • Street and easement excavations
  • General underground utility and infrastructure construction

Suitability depends on the actual excavation and the dimensions of the pipe, structure, utility component, and equipment involved. Contractors should verify required working clearances and the manufacturer’s allowable shield configuration before use.

Steel-Framed Aluminum Construction

The ESC ASF4 series combines aluminum panels with a steel frame, providing contractors with an alternative to conventional all-steel trench shields. At approximately 7,320 lbs, the 10×18 provides a 10-foot shield height and 18-foot overall length while retaining the steel-framed aluminum construction of the ASF4 series. Contractors should verify that the equipment used to transport, install, reposition, and remove the shield has adequate lifting capacity at the required operating radius.

Safety and Proper Use

Trench shields must be selected and used in accordance with the manufacturer’s current tabulated data and all applicable OSHA, state, and local excavation-safety requirements. A competent person must evaluate soil conditions, excavation depth, surcharge loads, groundwater, adjacent structures, equipment configuration, and changing jobsite conditions.

The maximum depth ratings shown above should not be used by themselves to determine whether this shield is appropriate for a particular excavation. Refer to the applicable ESC tabulated data for complete requirements, limitations, and allowable configurations.

Order the ESC ASF4 10×18 from Iron Lot

Contact Iron Lot for current availability, alternate spreader configurations, shipping information, and assistance selecting the right ESC steel-framed aluminum trench shield for your project.

Product Specifications

Weight 7320 lbs
Dimensions 216 × 120 × 36 in
Model

Steel Framed Aluminum Shield ASF4

Trench Box Size

10×18

Wall Thickness

4 Inch Wall

Material

Aluminum, Steel

System Type

Trench Box

Shield Height

10 ft

Shield Length

18 ft

Manufacturer

ESC

Reviews

There are no reviews yet.

Be the first to review “10′ x 18′ ESC ASF4 Steel-Framed Aluminum Trench Box”

Your email address will not be published. Required fields are marked *