6′ x 10′ Kundel Basic 3 Steel Trench Box

The Kundel Basic 3 6′ x 10′ steel trench box is a durable utility shield designed for spot repairs, service taps, minor mainline work, and industrial maintenance excavations. It is a practical choice for municipalities, plumbing contractors, maintenance departments, and underground utility crews using properly rated small excavators or rubber-tired backhoes.

This configuration combines a 6-foot sidewall height with a 10-foot overall length. The 9-foot opening between spreaders provides substantial longitudinal working room for compatible pipe, valves, fittings, utility connections, tools, and crew movement without requiring the excavation footprint of the longer 6′ x 12′ model.

The Basic 3 uses 3-inch double-wall, solid-welded steel sidewalls engineered to provide dependable steel durability while remaining manageable for appropriately rated excavation equipment. This model has a listed weight of approximately 1,660 lbs and features a knife-edge bottom to assist with positioning in compatible excavation conditions.

The 6′ x 10′ box can be used as a standalone trench shield where its dimensions and ratings are appropriate. It may also be used as an extension section in an approved stacked Basic 3 configuration when greater total vertical panel coverage is needed.

Each Basic 3 trench box requires four compatible spreaders. Spreaders are sold separately and must be selected according to the required inside width, excavation geometry, utility-component clearances, lifting equipment, and Kundel’s applicable tabulated data.

Key Benefits & Crew Efficiency

• 6-Foot Sidewall Height: Provides useful vertical panel coverage for compatible utility repairs, service taps, minor mainline work, and maintenance excavations.
• 10-Foot Overall Length: Provides an extended work area for compatible pipe, fittings, valves, tools, rigging, and utility connections.
• 9 Feet Between Spreaders: Provides substantial open longitudinal working space within the assembled trench box.
• Knife-Edge Bottom: Helps the trench box enter compatible soil during manufacturer-approved positioning procedures.
• Approximately 1,660 lbs: Designed for handling with properly rated small excavators, compact excavators, and rubber-tired backhoes.
• Steel Alternative to Aluminum: Provides solid-welded steel durability in a product line designed for smaller excavation equipment.
• Double-Wall Construction: Three-inch steel sidewalls are built for repeated use on demanding municipal, plumbing, and industrial maintenance projects.
• Cast Steel Spreader Collars: Durable collars provide connection points for compatible Kundel Basic 3 spreaders.
• Forged Spreader Pins: Secure compatible spreaders within the box’s collar system.
• Integrated Tamping Blocks: Reinforced contact areas support manufacturer-approved positioning procedures.
• Integrated Lifting Lugs: Provide designated lifting points for properly rated rigging and equipment.
• Stackable Design: Compatible stacking rings may allow the box to be combined with another approved Basic 3 section.
• Tandem Capability: Approved tandem connectors may allow compatible boxes to be joined for a longer protected work area.

Product Specifications

Pricing & Logistics

Price: $7,275.70

The listed price is for the Kundel Basic 3 6′ x 10′ trench box. Four compatible spreaders are required to assemble a complete box and are sold separately.

Contact Iron Lot to confirm current pricing, availability, compatible spreader lengths, stacking components, tandem connectors, optional accessories, applicable taxes, and freight charges.

Required Spreaders

Each Basic 3 trench box requires four compatible spreaders. The appropriate spreader length depends on the desired inside working width, excavation geometry, pipe or utility-component dimensions, and the limitations established in Kundel’s current tabulated data.

Spreaders should not be assumed to be included in the listed trench-box price. Confirm the required spreader size, quantity, forged spreader pins, and complete assembled configuration before ordering.

Optional Accessories

Available Basic 3 accessories may include:

• Compatible spreaders
• 12″ x 12″ utility cutout
• Stacking rings
• Tandem connectors
• Replacement forged spreader pins
• Compatible rigging and handling equipment

Optional accessories must be selected for the specific box and intended application. Confirm compatibility, pricing, and availability when requesting a quote.

Freight and Delivery Coordination

The trench box has a listed weight of approximately 1,660 lbs before adding spreaders, stacking rings, tandem connectors, rigging, or other accessories. The final assembled and shipping weight depends on the complete ordered configuration.

Transportation planning should account for the 10-foot panel length, component securement, unloading equipment, lifting capacity, and available assembly space.

Iron Lot can coordinate delivery to your contractor yard, municipal facility, equipment location, or jobsite.

Target Applications

The Kundel Basic 3 6′ x 10′ is designed for utility and maintenance excavations where crews need 6-foot vertical panel coverage and an extended longitudinal work area.

Typical applications may include:

• Water and sewer utility spot repairs
• Water-main and sewer-main taps
• Service-line connections
• Minor mainline repair work
• Valve and curb-stop access
• Localized utility exposure and maintenance
• Gas-service connections
• Electrical and telecommunications repairs
• Plumbing repair excavations
• Industrial maintenance projects
• Emergency municipal utility repairs
• Work requiring additional longitudinal space for components and tools

The 10-foot overall length provides more working room than the 6′ x 6′, 6′ x 7′, and 6′ x 8′ Basic 3 configurations. This additional space may be useful for compatible pipe sections, fittings, valves, service connections, rigging, tools, and crew movement.

Compared with the 6′ x 12′ model, the 10-foot box requires less excavation and positioning space. This may make it easier to use around pavement limits, existing utilities, traffic-control restrictions, nearby structures, landscaping, and other jobsite obstacles.

Suitability depends on the dimensions and locations of the pipe, structure, valve, fitting, service connection, utility component, tools, and equipment used inside the shield. Customers should verify that the 108-inch length between spreaders and 27-inch pipe clearance provide adequate room for the planned work.

Standalone and Stacked Configurations

The Basic 3 6′ x 10′ may be used as a standalone trench box where its height, length, clearances, soil ratings, and complete configuration are appropriate for the excavation.

As a 6-foot-high box, it may also be installed as an extension section on a compatible taller Basic 3 base box. This stacked arrangement can increase the total vertical panel coverage of the protective system.

Stacked configurations must use the required Kundel stacking rings or other manufacturer-approved connecting components. The base box, upper box, selected spreaders, connection points, structural capacities, and complete stacked arrangement must be compatible and permitted by Kundel’s applicable tabulated data.

Do not stack trench boxes solely because their exterior dimensions appear compatible. Product line, box length, spreader-collar arrangement, structural capacity, connection method, and the complete system configuration must all be verified.

Tandem Configurations

Compatible Basic 3 trench boxes may be connected in tandem to create a longer protected work area when permitted by Kundel’s tabulated data.

Tandem configurations require approved connectors and a complete evaluation of both boxes, the selected spreaders, connection locations, excavation geometry, lifting plan, and manufacturer requirements.

The 10-foot box already provides a substantial longitudinal working area. Tandem use should be limited to projects where additional length is required and the complete connected system is supported by the applicable manufacturer data.

Do not use improvised connections or assume that placing two trench boxes next to each other creates an approved tandem configuration.

Critical Selection & Safety Factors

Is the Kundel Basic 3 6′ x 10′ Right for Your Excavation?

The exterior height and length of a trench box do not by themselves determine whether it is suitable for a project.

The selection process should consider:

• Whether the box will be used independently, stacked, or in tandem
• Compatibility with any additional Basic 3 box or extension section
• Excavation depth, width, length, and geometry
• Available longitudinal placement space
• Soil classification
• Surcharge loads
• Groundwater and changing soil conditions
• Traffic, structures, spoil piles, and equipment near the excavation
• Pipe, fitting, valve, structure, and utility-component dimensions
• Required working clearance
• Selected spreader length and inside width
• Access and egress requirements
• Lifting and placement equipment
• Stacking rings, tandem connectors, and optional cutouts
• The complete protective-system configuration

The project’s Competent Person must inspect the excavation, classify the soil, evaluate changing conditions and adjacent hazards, and verify that the selected trench-protection system is appropriate for the excavation and used correctly.

Depth Ratings & Tabulated Data

The listed maximum soil depth ratings for the Basic 3 6′ x 10′ are:

• Type A soil: 39 feet
• Type B soil: 23 feet
• Type C soil: 18 feet

These ratings must be interpreted through Kundel’s current tabulated data. They do not mean that a 6-foot-high trench box automatically provides a protected work area at the listed excavation depths.

The allowable depth may depend on whether the box is used independently or as part of a stacked configuration, the selected spreader width, complete system height, soil conditions, surcharge loads, excavation geometry, and other jobsite factors.

Placement of the protective system, including the distance between the bottom of the shield and the excavation bottom and the position of the shield relative to the top of the excavation, must comply with manufacturer instructions and applicable requirements.

Excavations exceeding 20 feet in depth generally require a protective system designed or approved under the applicable engineering requirements. Do not rely on product-page ratings as a substitute for Kundel’s current tabulated data or a project-specific engineered design when one is required.

Assembly, Lifting & Inspection

The Basic 3 trench box must be assembled with four compatible spreaders and the required forged spreader pins before use. Stacked or tandem configurations also require all approved connecting components.

The complete box should be lifted, lowered, repositioned, and removed using the designated lifting lugs, approved rigging, and equipment with sufficient rated capacity.

Tamping blocks provide reinforced contact areas, while the knife-edge bottom assists with positioning. Installation and movement must follow Kundel’s procedures. Do not strike unapproved areas of the sidewalls, spreader collars, lifting lugs, or other structural components.

Before each use, inspect:

• Double-wall steel sidewalls
• Knife-edge sections
• Cast steel spreader collars
• Spreaders and forged spreader pins
• Tamping blocks
• Lifting lugs
• Stacking rings and connection points
• Tandem connectors
• Welds and structural areas
• Optional utility cutouts
• Components for cracks, bends, distortion, damage, or excessive wear

Damaged or questionable components should be removed from service until they have been evaluated according to the manufacturer’s requirements.

Why Choose the Kundel Basic 3 6′ x 10′?

The Basic 3 6′ x 10′ combines useful vertical panel coverage, an extended working length, and durable welded-steel construction. It is designed for crews that need a dependable steel trench shield that can be handled with appropriately rated smaller excavation equipment.

The 10-foot length provides more working room than the 6-foot, 7-foot, and 8-foot Basic 3 models. It may accommodate compatible pipe, valves, fittings, service connections, tools, and equipment while requiring less excavation space than the 12-foot configuration.

This size may be particularly useful for municipal repairs, plumbing work, minor mainline projects, and industrial maintenance excavations where a 6-foot shield height and 9-foot opening between spreaders are appropriate.

The double-wall sidewalls, cast steel spreader collars, forged pins, tamping blocks, lifting lugs, and knife-edge bottom provide a field-ready system for municipal, plumbing, industrial maintenance, and underground utility crews.

Final selection must be based on the actual excavation, intended application, utility-component dimensions, selected spreaders, complete standalone or stacked configuration, Kundel’s current tabulated data, and the requirements established by the project’s Competent Person.

Request Pricing and Availability

Iron Lot supplies trench boxes and trench safety equipment to contractors throughout the United States.

Contact us for:

• Current product availability
• Spreader selection and pricing
• Multiple-unit quotations
• Freight quote and delivery coordination
• Alternative aluminum trench box options
• Steel versus aluminum trench box comparisons
• Equipment financing information

This Product Ships from Ohio

Payment Options:

We accept company check, wire transfer, ACH, and credit card payments. We also offer financing through Ascentium Capital.

Financing: Ascentium Capital offers fast and flexible financing. With their quick and convenient way to purchase equipment, working with Ascentium Capital helps you acquire the funds you need for your equipment purchase. With financing and leasing of up to $2,000,000, Ascentium Capital works with you to make the application process simple and at no obligation.

To learn more about Ascentium Capital and how it can assist you, click image below:

Call Iron Lot at 336-516-8011 or request a quote online for current pricing, availability, and freight information.

Not sure which trench box is right for your project? Compare additional trench boxes for sale, including steel, aluminum, and manhole box options.